COURSE OVERVIEW

This Non-Destructive Testing (NDT) training course reviews the fundamental principles, typical applications, advantages & disadvantages, applicable international standards and the training requirements for Inspectors for the principal types of NDT techniques that are widely specified for the identification of imperfections & defects in metals & other engineering materials. 

The NDT techniques covered include:

• ULTRASONIC TESTING (UT)

• RADIOGRAPHIC TESTING (RT)  

• MAGNETIC PARTICLE TESTING (MT)

• DYE PENETRANT TESTING (PT)

• EDDY CURRENT TESTING (ET)

• ACOUSTIC EMISSION (AE) TESTING

The course has been developed by academic & industry experts which ensures that the content is both academically rigorous and practically relevant. 

The course is suitable for candidates at all levels, including those new to NDT, as no specific qualification entry requirements are required. 

Candidates also receive a comprehensive, full-colour Training Handbook that serves as both a course guide and a valuable reference tool after completion of the course.

COURSE STRUCTURE

The course is structured as follows:

Chapter 1 — Introduction

The courseopens by defining the purpose and scope of NDT and why it is essential for ensuring the integrity, safety, and reliability of engineering components. It clarifies the distinctions between defects, imperfections, flaws, discontinuities and indications and introduces terminology used in external standards.

Chapter 2 — Radiographic Testing (RT)

This chapter explains the principles of X‑rays and gamma rays, their place in the electromagnetic spectrum, and how radiographic images are formed. It covers film radiography, digital and computed radiography and the factors that influence image quality.

Chapter 3 — Ultrasonic Testing (UT)

A comprehensive review of ultrasonic inspection, covering:

• Sound wave properties

• Probe types (normal, angle, twin‑crystal)

• Longitudinal and shear waves

• Mode conversion, refraction & Snell’s Law

• Pulse‑echo inspection for defect detection and depth measurement

• Thickness measurement techniques

• Dead zone and probe selection

• DAC calibration using flat‑bottomed and side‑drilled holes

• Acceptance levels such as BS EN ISO 11666

• Amplitude, dB calculations, and the 6 dB drop method for sizing indications

• Advanced techniques include Phased Array (PAUT), Time of Flight Diffraction (ToFD), guided wave testing, and automated / immersion systems.

Chapter 4 — Magnetic Particle Inspection (MT / MPI)

This chapter covers the principles of magnetic flux leakage, surface preparation and the behaviour of ferromagnetic materials. It explains magnetisation methods, interpretation of indications, and demagnetisation. Acceptance criteria reference BS EN ISO 23278.

Chapter 5 — Dye Penetrant Testing (PT)

PT is explained through the principles of capillary action, penetrant types, developer systems, and inspection sequences. Acceptance levels reference BS EN ISO 23277, applicable to structural steel welds.

Chapter 6 — Eddy Current Testing (ET)

This chapter introduces electromagnetic induction, probe types, frequency effects, and the detection of surface and near‑surface cracks. Automated ET systems are also discussed.

Chapter 7 — Acoustic Emission Testing (AE)

AE is presented as a dynamic monitoring technique that detects transient elastic waves generated by crack growth or structural changes. The chapter outlines AE characteristics, sensors and typical applications.

Chapter 8 — Training Requirements of Inspectors (BS EN ISO 9712 & BS EN 4179)

The final chapter explains the competency framework for NDT personnel.

BS EN ISO 9712: Levels 1, 2, and 3, plus product‑sector certification

BS EN 4179: Requirements for aerospace NDT personnel

BENEFITS OF OUR TRAINING

1. Career Advancement: The training is designed to enhance candidates' career prospects by increasing their technical knowledge, skills, and understanding. 

2. No Prior Knowledge Required: The course is suitable for candidates at all levels, including those new to non-destructive testing, as no specific qualification entry requirements are needed. The course material is clear & easy to follow with reference to helpful U-Tube videos.

3. Industry-Relevant: Developed by academic & industry experts ensures that the content is both academically rigorous and practically relevant. 

4. Accredited Certifications: Our courses have accreditation from highly experienced, professionally accredited Chartered Engineers (CEng), Materials Engineers, Metallurgists (MIMMM) & Welding Technologists (MWeldI), with decades of industry experience working for leading engineering companies such as British Steel, Sheffield Forgemasters & Corus. 

5. Proven Success: Our training has empowered professionals from leading organisations & professional bodies including Arcelor Mittal, Bourne Steel, J & D Pierce Contracts Ltd, UKRI - Science & Technologies Facilities Council, TAQA Bratani, Moog Aircraft Group, Millar Callaghan Engineering Services Ltd, Murphy Group, Professional Lifting Services Ltd, Mclaren Automotive, Mueller Europe, WQiC, Harold Newsome Ltd, William Haley Engineering Ltd, RWE Generation UK PLC, TEi Ltd, The Institute of Cast Metal Engineers (ICME), Sulzer and The Manufacturing Technology Centre (MTC.)

6. Excellent Feedback: Our courses have received excellent feedback from candidates who have completed them, highlighting their effectiveness in developing knowledge, skills and understanding. To review their comments, please follow the link.

FLEXIBLE SELF STUDY COURSE FOR CANDIDATES

Start & learn when it suits you — flexible learning for job‑ready NDT knowledge & skills!

With our flexible, self study courses, candidates can start and progress through the training at anytime, anywhere & at their own pace. No need to wait for course dates for classroom-based or online training courses and no need to pay travelling expenses & to spend time away paying for hotels & other living expenses. 

Total estimated Self Study time required to complete the course is 10 Hours. 

All course materials would be posted & e-mailed to the candidate. 

Candidates also receive a comprehensive, full-colour Training Handbook that serves as both a course guide and a valuable reference tool after completion of the course. 

Candidates also have the support of a Course Tutor as they progress through the course.

Candidates are assessed on the course by continuous assessment.

Course Fees: £750 per person inclusive of a full-colour Training Handbook & all Assessment & Certification fees.

To make a booking, please follow the link to download & complete a booking form. 

COURSE PACKAGE FOR TRAINING PROVIDERS

Are you a training provider looking to grow your technical training course offerings quickly, professionally and with proven industry impact? 

If so, we offer for purchase this course package, which forms part of our extensive range of course packages, which include all the course materials required to enable training providers, further & higher educational institutions and employers, deliver industry-leading technical training courses. 

Course materials you will receive for this course package: 

1. Course Presentation: (in Microsoft PowerPoint format.) The presentation also provides the basis for producing a Training Handbook for the course.

2. Covers & Contents: For use when producing a Training Handbook.

3. Course Assessments & Model Answers. Including a marking scheme.

All course materials are written in English and are supplied in ‘Microsoft PowerPoint', 'Microsoft Word' or ‘Adobe Acrobat pdf' format. 

All course materials would be supplied without any branding and are editable to enable you to apply your own company name / logos / branding.

Total estimated time to deliver the training 10 hours.

For a quotation to purchase the course package, please Contact Us.